Wika DPS40 Manual do Utilizador descarregar pdf (Página 13)

WIKA operating instructions DELTA-plus, DELTA-comb and DELTA-switch 13

14093265.01 03/2014 GB/D/F/E

5. Transport, packaging and storage

5.1 Transport

Check the dierential pressure gauge for any damage that may have been

caused by transport. Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport (e.g.

change in installation site, sending for repair).

5.3 Storage

Permissible conditions at the place of storage

Storage temperature: -40 ... +70 °C

In order to prevent damage, the following points should be noted for the

storage of the pressure gauges:

■

Leave the pressure gauges in their original packaging

■

Following any possible removal of the measuring instruments, e.g. for testing,

the instrument should again be stored in its original packaging

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust, humidity and corrosive gases

■

Potentially explosive environments, ammable atmosphere

WARNING!

Before storing the instrument, any residual media must be re-

moved. This is of particular importance if the medium is hazardous

to health, e.g. caustic, toxic, carcinogenic, radioactive, etc.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

Sem comentários

Wika DPS40 Manual do Utilizador Página 13