Wika R-1 Manual do Utilizador Página 19
- Página / 92
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
19WIKA operating instructions pressure transmitter, model R-1
14026284.01 11/2012 GB/D/F/E
GB
6. Commissioning, operation
■
Conditions of acceptability - When installed in the nal use equipment, etc., the following are among
the considerations to be made:
1. The instrument must be installed in accordance with the enclosure, mounting, spacing, and segre-
gation requirements of the nal application.
2. The clearances given here (air and leakage paths), nominal values, etc. must be permissible
within the nal application.
3. This component is intended to be factory installed only.
4. The connectors of these instruments have not been tested for their suitability for eld wiring
connectors ("eld wiring"). The acceptability of the terminals, and connections to these terminals,
including temperature and safety, must be evaluated in the end-product application.
5. On the instrument, there is no isolated equipotential bonding terminal or connection line available
(that would maintain the equipotential bonding during dismantling in the live state by a service
technician for testing or setting purposes). This requirement depends on the application and the
standards applicable to the end product.
6. The mould stress test was conducted at 110 °C and the suitability will be dened with the
end-product application.
■
Select a cable diameter that matches the cable gland of the plug. Make sure that the cable gland of
the mounted plug has a tight t and that the seals are present and undamaged. Tighten the threaded
connection and check that the seal is correctly seated, in order to ensure the ingress protection.
■
For cable outlets, make sure that no moisture enters at the cable end.
- Druckmessumformer, Typ R-1 1
- 14026284.01 11/2012 GB/D/F/E 2
- Contents 3
- 1. General information 4
- 2. Safety 6
- 3. Specications 10
- 4. Design and function 15
- 6. Commissioning, operation 16
- 7. Maintenance and cleaning 21
- 8. Faults 21
- 1. Allgemeines 26
- 2. Sicherheit 28
- 3. Technische Daten 31
- 4. Aufbau und Funktion 37
- 6. Inbetriebnahme, Betrieb 38
- 7. Wartung und Reinigung 43
- 8. Störungen 43
- Sommaire 47
- 1. Généralités 48
- 2. Sécurité 50
- 3. Spécications 53
- 4. Conception et fonction 59
- Surface de clé 60
- Filetage parallèle 62
- Filetages coniques 62
- Selon EN 837 Selon DIN 3852-E 62
- NPT, R et PT 62
- 7. Entretien et nettoyage 65
- 8. Dysfonctionnements 65
- Contenido 71
- 1. Información general 72
- 2. Seguridad 74
- 3. Datos técnicos 77
- 4. Diseño y función 83
- Supercie plana 84
- (vista exterior) 85
- (sección transversal) 85
- Roscas cilíndricas 86
- Rosca cónica 86
- NPT, R y PT 86
- 7. Mantenimiento y limpieza 89
- 8. Fallos 89
- WIKA global 92
Manuais e produtos relacionados com Instrumentos de medida Wika R-1
Instrumentos de medida Wika S-11 Manual do Utilizador
(102 páginas)
(102 páginas)
(25 páginas)
Instrumentos de medida Wika UPT-21 Manual do Utilizador
(120 páginas)
(120 páginas)
Philips AZ302/05 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für CD Spieler Philips AZ302/05.
Wir stellen 1 PDF-Handbücher Philips AZ302/05 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentários a estes Manuais