Wika CPG500 Manual do Utilizador descarregar pdf (Página 13)

6 Commissioning, operation

WIKA Operating Instruction, Model CPG500 13

14034181.01 01/2013 GB/D

6.2 Operating the CPG500 digital pressure gauge

6.2.1 Turning on (ON)

6.2.2 Turn off (OFF)

Press once (briefly)

6.2.3 Turn on backlight

Press for 2 seconds. The backlight is shut off automatically after 20 seconds.

6.2.4 MIN/MAX indication

Use this key to toggle the required value.

The key function is sequential; the values are indicated in the display in sequence.

The MIN/MAX function is used to measure pressure peaks. The respective lowest (MIN) and

highest (MAX) measured values are stored in the MIN/MAX memory. Values in the MIN/MAX

memory are erased when the device is turned off. If different pressure tests are to be carried out in

succession, the MIN/MAX memory must be erased after each measurement.

MIN/MAX-value is indicated in the display.

A self-test procedure is carried out

The measuring range is indicated (FS)

Auto Power Off function is active.

Power off activates automatically after

5 minutes. This function can be

altered in MENU.

Display mode:

ACT value displayed

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Sem comentários

Wika CPG500 Manual do Utilizador Página 13