Wika CPH62I0 Manual do Utilizador descarregar pdf (Página 28)

28 WIKA operating instructions, model CPH62I0

11221801.02 02/2011 GB/D/F/E

6. Commissioning, operation

Viewing Recorded Measurements

Within the “LoGG-Stor“ function the measurements can be viewed directly on the

instrument display as well as through a computer (“Func-CYCL“ only allows for the data

to be viewed on computer). Press the ´SET/MENU´ key for 2 seconds: The rst menu

displayed is now “rEAd-LoGG“ (read logger data). By then pressing the ´TARA´ key, the

last measurement recorded will be displayed; pressing the ´TARA´ key again scrolls

between the dierent values related to this data point. Pressing the ´MIN´ key or ´MAX´

key selects dierent data points.

6.4.2 “Func-CYCL“: Automatic datalogging with adjustable cycle-time

The Logger cycle-time is adjustable (see Conguration). For example, setting “CYCL“ =

60: A measurement is made every 60 seconds.

When the slow measurement “rAtE-Slo“ is chosen, additionally a low power function is

available: “Lo.Po“. If “Lo.Po“ is on, the device only will take a measurement at the point

of time of the recording. In between the recordings the measuring is not active. This

decreases the power consumption enormously and therefore is recommended for long

time recordings where no mains adapter is available.

Max. number of measurements: CPH62I0-S1: 10,000

CPH62I0-S2: 4,000

(at max. 64 recording sequences)

Cycle-time: 1 ... 3,600 seconds (=1 h),

selectable from the conguration menu

A measurement contains:

■

Slow measuring rate (rAtE-SLo):

- Sensor 1: current value at that data point

- Sensor 1: Min-Peak, Max-Peak since last data point

- Sensor 2*: instantaneous value at that data point

- Sensor 2*: Min-Peak, Max-Peak since last data point

- Instantaneous dierence (Sensor 1 - Sensor 2)*: at that data point

- Min-Peak, Max-Peak of dierence (Sensor 1 - Sensor 2)*: Min-Peak, Max-Peak

since last data point

■

Fast measuring rate (rAtE-FASt, -P.dEt):

- Sensor 1: average since last data point

- Sensor 1: Min-Peak, Max-Peak since last data point

- Sensor 2*: average since last data point

- Sensor 2*: Min-Peak, Max-Peak since last data point

- Average dierence (Sensor 1 - Sensor 2)*: since last data point

- Min-Peak, Max-Peak of dierence (Sensor 1 - Sensor 2)*: Min-Peak, Max-Peak

since last data point

* Only for 2-channel version CPH62I0-S2

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 159 160

Comentários a estes Manuais

Sem comentários

Wika CPH62I0 Manual do Utilizador Página 28

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Wika CPH62I0