Wika CPH62I0 Manual do Utilizador descarregar pdf (Página 33)

33WIKA operating instructions, model CPH62I0

11221801.02 02/2011 GB/D/F/E

8. Faults

Display Meaning Measures

Err.1

Measured value above allowable

range

Check: Is the pressure outside the

sensor‘s range? -> measured value

too high!

Sensor faulty Return to manufacturer for repair

Err.2

Measured value below allowable

range

Check: Is the pressure outside the

sensor‘s range? -> measured value

too low!

Sensor defective Return to manufacturer for repair

Err.3

Display range exceeded Check: value above 9999 -> too high

to be displayed!

Err.4

Display range underow Check: value below ‚-2000‘ (Tare?)

-> too low!

Err.7

System error Return to manufacturer for repair

Err.11

Value could not be calculated Choose dierent unit

Calculation range exceeded Choose dierent unit

WARNING!

If faults cannot be eliminated by means of the measures listed above,

the instrument must be shut down immediately, and it must be ensured

that pressure and/or signal are no longer present, and it must be

prevented from being inadvertently put back into service.

In this case, contact the manufacturer.

If a return is needed, please follow the instructions given in chapter “9.2

Return”.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 159 160

Sem comentários

Wika CPH62I0 Manual do Utilizador Página 33