Wika CPG1000 Manual do Utilizador descarregar pdf (Página 20)

20 WIKA operating instructions model CPG1000

11568047.02 08/2012 GB/D

5. Transport, packaging and storage

5.1 Transport

Check the precision digital pressure gauge for any damage that may have been caused by

transport. Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport (e.g. change in

installation site, sending for repair).

5.3 Storage

Permissible conditions at the place of storage:

■

Storage temperature: -20 ... +70 °C

■

Humidity: 0 ... 90 % relative humidity (no condensation)

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust and corrosive gases

Store the CPG1000 in its original packaging in a location that fulls the conditions listed

above. If the original packaging is not available, pack and store the instrument as described

below:

1. Wrap the instrument in an antistatic plastic lm.

2. Place the instrument, along with shock-absorbent material, in the packaging.

3. If stored for a prolonged period of time (more than 30 days), place a bag, containing a

desiccant, inside the packaging.

WARNING!

Before storing the instrument (following operation), remove any residual

media. This is of particular importance if the medium is hazardous to

health, e.g. caustic, toxic, carcinogenic, radioactive, etc.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Sem comentários

Wika CPG1000 Manual do Utilizador Página 20