Wika CPH7600 Manual do Utilizador descarregar pdf (Página 23)

23WIKA operating instructions, model CPH7600

14051628.01 11/2012 GB/D

6. Commissioning, operation

Use the "AUTO OFF DONE" option to set the parameters and return home. The auto

shut-o time is reset whenever a key is pressed.

6.4.5 Activating and deactivating a display

Use the "DISPLAY" option on the 'Display selection' main menu to access the display

activation menu.

The F2 key can be used to select the desired display. The "ON/OFF" option switches

the active display on or o. The active display and the current status "ON/OFF" are

shown in the lower display.

Select the "DONE" option to save the changes and return home. When a display

is deactivated its conguration is retained. As soon as the display is activated, the

conguration is checked against the congurations of the other currently-active displays.

If there is any conict between congurations, the recalled display’s conguration is

modied to avoid the conict. If all three displays are deactivated the lower display will

switch on automatically.

6.4.7 Damping

Damping can be turned ON or OFF using the "DAMPING" menu selection. As soon as

the damping function is switched ON, the calibrator displays the running average of the

last ten measurements. The calibrator makes approximately three readings per second.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 91 92

Sem comentários

Wika CPH7600 Manual do Utilizador Página 23