Wika 54_twintemp Manual do Utilizador descarregar pdf (Página 16)

14004105.01 05/2011 GB/D/F/E

16 WIKA operating instructions model 54, Twin-Temp

4. Solder each wire to the

corresponding contact

Solder iron

5. Bend cable shield outwards,

assemble half shells

Half shells

6. Slide the EMI ring and collet

against the half shells so that the

shield is clamped between EMI

ring and half shells

Internal guides

7. Put the assembled cable into the

plug-housing, considering the

internal guides.

If needed, secure thread (A) with

locking glue

8. Screw back nut on the plug, hold

against at (1) and fasten with an

open-ended spanner.

Tightening torque: 0.6 Nm

10. Accessories

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Sem comentários

Wika 54_twintemp Manual do Utilizador Página 16