Wika 54_twintemp Manual do Utilizador descarregar pdf (Página 6)

14004105.01 05/2011 GB/D/F/E

6 WIKA operating instructions model 54, Twin-Temp

2. Safety

WARNING!

Before installation, commissioning and operation, ensure

that the appropriate bimetal thermometer has been

selected in terms of measuring range, design and specic

measuring conditions. The compatibility of the wetted

parts of the process connection (thermowell, thermowell

stem) with the medium must be tested.

Non-observance can result in serious injury and/or

damage to the equipment.

Further important safety instructions can be found in the

individual chapters of these operating instructions.

2.1 Intended use

The combined bimetal thermometer is mainly used in the process

industry to monitor process temperatures.

The combined bimetal thermometer has been designed and built

solely for the intended use described here, and may only be used

accordingly.

The technical specications contained in these operating instructions

must be observed. Improper handling or operation of the combined

bimetal thermometer outside of its technical specications requires

the instrument to be taken out of service immediately and inspected

by an authorised WIKA service engineer.

The manufacturer shall not be liable for claims of any type based on

operation contrary to the intended use.

2. Safety

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

Sem comentários

Wika 54_twintemp Manual do Utilizador Página 6