Wika 55 Manual do Utilizador descarregar pdf (Página 11)

11583747.03 10/2013 GB/D/F/E

WIKA operating instructions models 53, 54, 55 (ATEX) 11

4.2 Scope of delivery

Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport

Check instrument for any damage that may have been caused by

transport.

Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during

transport (e.g. change in installation site, sending for repair).

5.3 Storage

Permissible conditions at the place of storage:

Storage temperature: -20 ... +60 °C

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust and corrosive gases

Store the instrument in its original packaging in a location that fulls

the conditions listed above. If the original packaging is not available,

pack and store the thermometer as described below:

1. Wrap the thermometer in an antistatic plastic lm.

2. Place the thermometer, along with shock-absorbent material, in the

packaging.

3. If stored for a prolonged period of time (more than 30 days), place a

bag, containing a desiccant, inside the packaging.

4. Design, function / Transport, packaging ...

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Sem comentários

Wika 55 Manual do Utilizador Página 11