Wika BCS10 Manual do Utilizador descarregar pdf (Página 21)

WIKA operating instructions calibration system, model BCS10

14051046.01 10/2012 GB/D/F/E

6. Commissioning, operation

6.8 Battery replacement

1. Turn the orice plate of the digital pressure gauge approx. 90° to the right and

remove it.

2. Remove the front panel of the digital pressure gauge. This will give you access to

the battery compartment.

3. Replace the batteries. Use 1.5 V AA alkaline batteries only.

4. Close the instrument again. Ensure that the front is properly aligned.

6.9 Measurement setup and adjustment

WARNING!

Only connect or disconnect test and calibration installations once the

system has been depressurised!

1) Turn the instrument on and o

2) Perform a zero-point adjustment

3) Fine-adjustment valve

4) Pressure relief valve

5) Switching valve pressure/vacuum

generation

6) Pump handles

7) Adjustable knurled nut for

setting the pump performance

(overpressure protection)

8) Adjustable overpressure valve

9) Metal exible hose for connecting

the test item, with quick-acting

coupling on both sides, length 2 m

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 107 108

Sem comentários

Wika BCS10 Manual do Utilizador Página 21