Wika IPT-11 Manual do Utilizador descarregar pdf (Página 23)

The adjustment unit is thus switched over from bar to m.

Proceed as follows to select the temperature unit:

à Activate the selection with [OK] and select "Temperature unit

with [->].

à Activate the selection with [OK] and select the requested unit with

[->] (e.g. °F).

à Conﬁrm with [OK].

The temperature unit is hence switched over from °C to °F.

Proceed as follows:

1 Activate in the menu item "Position correction" the selection with

[OK].

Position correction

Oﬀset

+0000 mbar

53 mbar

2 Select with [->], e.g. to accept actual measured value.

Position correction

Accept current measured

value?

▶

Edit

3 Conﬁrm with [OK] and move to min.(zero) adjustment with [->].

Proceed as follows:

1 Edit the % value in the menu item "Min. adjustment" with [OK].

Min. adjustment

+000.0 %

+0000.0 mbar

0000.0 mbar

2 Set the requested percentage value with [+] and [->].

3 Edit the requested mbar value with [OK].

4 Set the requested mbar value with [+] and [->].

5 Conﬁrm with [+] and move to max. adjustment with [->].

The min. adjustment is ﬁnished.

Information:

For an adjustment with ﬁlling, simply enter the actual measured value

indicated at the bottom of the display.

Selection options: °C, °F.

Carry out position cor-

rection

Carrying out min. ad-

justment

Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor • 4 … 20 mA 23

6 Set up with the indicating and adjustment module

37300-EN-100302

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Comentários a estes Manuais

Sem comentários

Wika IPT-11 Manual do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Wika IPT-11