Wika CTM9100-150 Manual do Utilizador descarregar pdf (Página 15)

100

15WIKA operating instructions, models CTD9100, CTB9100, CTM9100

11263911.02 05/2014 GB/D

4. Design and function

Front and top of the model CTM9100-150

On the top of the multi-function calibrator, you will nd the dry

well access opening for inserting the dierent inserts or lling

(Ø 60 mm x 150 mm).

The controller, with display and control elements, is located

on the front of the calibrator. In addition, the control elements

for the external reference are placed on the front.

4.6 Isometric views of the model CTM9100-150 multi-function calibrator

Underside of the instrument

On the underside of the instrument are the mains connection

socket and the power switch with its fuse-holder.

These are located in the centre, at the front. Furthermore,

there are two air intakes located on the underside of the

instrument.

The air intakes must not be obstructed in any way.

Rear of the instrument

On the rear of the equipment is the product label with the key

information about the particular model.

Furthermore, the individual serial number (e.g. S/N 550 33 44)

as well as the mains voltage and the fuse rating is given.

You will also nd the connector for the RS-485 interface here.

Mains

connection

socket with

power switch

Fan 1Fan 2

Block

RS-485 interface

Product

label

Block

Control-

ler for the

stirrer

Controller

Handle

Socket for

ext. refer-

ence

Switch for

ext. refer-

ence

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

Comentários a estes Manuais

Sem comentários

Wika CTM9100-150 Manual do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Wika CTM9100-150