Wika CTM9100-150 Manual do Utilizador descarregar pdf (Página 26)

100

26 WIKA operating instructions, models CTD9100, CTB9100, CTM9100

11263911.02 05/2014 GB/D

7. Operating elements of the calibrator/micro calibration bath

7.4.2 Switching on automatic control

For certain tasks, it is advantageous to switch o control (e.g.

to make settings on the calibrator or micro calibration bath).

In calibration mode, press button P for approx. 5 secs., this

opens the main menu.

The upper PV display will show OPEr.

In the lower SV display, the LED SET will blink.

Press button 5 or button 6 until OFF is displayed.

Conrm with button P.

On the upper PV display, the current reference temperature

and OFF are indicated alternately.

On the lower SV display, the currently-selected set tempera-

ture is displayed.

CAUTION!

The control is now switched o and the

reference temperature will fall steadily,

unless it is corrected.

7.4.3 Switching on automatic control

The control is switched o when the following display is

shown:

On the upper PV display, the current reference temperature

and OFF are indicated alternately.

On the lower SV display, the currently-selected set tempera-

ture is displayed.

The control is switched back on by pressing button P for

approx. 5 secs., this opens the main menu.

The upper PV display will show ’rEG.

In the lower SV display, the LED SET will blink.

Conrm switching the control on by pressing button P.

CAUTION!

Control is now activated. The calibrator or

micro calibration bath will default to calibra-

tion mode and the set temperature will be

reached.

Display in main menu

Control OFF menu

Display with setting Control OFF

Display rEG

Display with setting Control OFF

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 99 100

Comentários a estes Manuais

Sem comentários

Wika CTM9100-150 Manual do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Wika CTM9100-150