Wika CTM9100-150 Manual do Utilizador descarregar pdf (Página 9)

100

9WIKA operating instructions, models CTD9100, CTB9100, CTM9100

11263911.02 05/2014 GB/D

3. Specications

Approvals and certicates, CTD9100 series

CE conformity

EMC directive 2004/108/EC, EN 61326 emission (group 1, class B) and interference immunity

(industrial application)

Low voltage directive 2006/95/EC, EN 61010-1, safety requirements for electrical equipment for measure-

ment, control and laboratory use

Certicate

Calibration 3.1 calibration certicate per DIN EN 10204

Option: DKD/DAkkS calibration certicate

For further specications see WIKA data sheet CT 41.28 and the order documentation.

3.2 Micro calibration bath, CTB9100 series

Model CTB9100-165 Model CTB9100-225

Temperature range -35 ... +165 °C t

amb.

... 225 °C, optional t

amb.

... 255 °C

Accuracy ±0.2 K ±0.3 K

Stability ±0.05 K ±0.05 K

Display resolution 0.1 °C 0.1 °C

Heating time incl. stabilisation

30 min from 20 to 160 °C 20 min from 20 to 225 °C

Cooling time incl. stabilisation

30 min from +20 to -20 °C 30 min from 225 to 50 °C

Immersion depth 150 mm 150 mm

Volume Approx. 0.6 litres Approx. 0.6 litres

Tank dimensions Ø 60 x 165 mm Ø 60 x 165 mm

Voltage supply

Power supply AC 100 ... 240 V, 50/60 Hz AC 230/240 V, 50/60 Hz

(AC 100/115 V, 50/60 Hz)

Power consumption 375 VA 1,000 VA

Power cord for Europe, AC 230 V for Europe, AC 230 V

Communication

Interface RS-485 RS-485

Case

Dimensions 215 x 305 x 425 mm (W x H x D) 150 x 270 x 400 mm (W x H x D)

Weight 12 kg 7.9 kg

2) The reference thermometer with which the measurements are performed, has a diameter of 6 mm.

4) AC 115 V power supply must be specied on the order, otherwise an AC 230 V one will be delivered.

Accessories Model CTB9100-165 Model CTB9100-225

DC 200.05 silicone oil: -40 ... +130 °C,

FP* = 133 °C

from -35 ... +130 °C, very well usable not recommended

DC 200.10 silicone oil: -35 ... +160 °C,

FP* = 163 °C

from -35 ... +160 °C, well usable not recommended

DC 200.20 silicone oil: 10 ... 220 °C,

FP* = 232 °C

not recommended from 40 ... 225 °C, well usable

DC 200.50 silicone oil: 25 ... 250 °C,

FP* = 280 °C

not recommended from 80 ... 255 °C, well usable

* FP = Flash point

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 99 100

Comentários a estes Manuais

Sem comentários

Wika CTM9100-150 Manual do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Wika CTM9100-150