Wika DPT-10 Manual do Utilizador descarregar pdf (Página 47)

Unit of measurement

Density

0001000

kg/dm³

6 Enter the requested density value with [->] and [+], conﬁrm with

[OK] and move to position correction with [->].

The adjustment unit is thus switched over from bar to m.

Proceed as follows to select the temperature unit:

à Activate the selection with [OK] and select "Temperature unit

with [->].

à Activate the selection with [OK] and select the requested unit with

[->] (e.g. °F).

à Conﬁrm with [OK].

The temperature unit is hence switched over from °C to °F.

The position correction compensates the inﬂuence of the installation

position of the instrument on the measured value. In this menu item,

the oﬀset value as well as the current measured value are displayed.

Proceed as follows:

1 Activate in the menu item "Position correction" the selection with

[OK].

Position correction

Oﬀset

0.0000 bar

0.0035 bar

2 Select with [->], e.g. to accept the actual measured value

0.0035 bar.

Position correction

Accept current measured

value?

▶

Edit

3 Conﬁrm with [OK].

Position correction

Oﬀset

-0.0035 bar

0.0000 bar

4 Move to min. (zero) adjustment with [->].

The current measured value was corrected to 0, the corrective value is

available in the display as oﬀset value with sign reversal.

Position correction

Diﬀerential pressure transmitter DPT10 - metal measuring diaphragm • Proﬁbus PA 47

6 Adjustment with the indicating and adjustment module

37245-EN-100120

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 95 96

Comentários a estes Manuais

Sem comentários

Wika DPT-10 Manual do Utilizador Página 47

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Wika DPT-10